Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000
christmas decorative lighting aluminum track for eaves and windows-0

Christmas Light Installation

Home >  Products >  Permanent Outdoor Lighting >  Christmas Light Installation

Christmas Decorative Lighting Aluminum Track for Eaves and Windows

Holiday lighting is usually a job that repeats: ladders up, strings clipped on, strings taken down and stored. The alternative is an extruded 6063-T5 aluminum track fixed to the eave, soffit or trim once, with an RGBW strip inside, so the holiday becomes a scene on a controller rather than an installation. We extrude, finish and cut the sections in-house and supply the diffuser, end caps, gaskets and clips as one system.

In the season, the track is what keeps the display looking drawn rather than pinned. An opal, UV-stabilized polycarbonate diffuser mixes the light across the profile width, so colour reads as one saturated line with no resolvable diode points at street distance. Corners are mitred or closed with connectors, which is the difference between a continuous outline at the gable end and a visible joint every metre.

Winter is a specification, not a season. Sealed assemblies with gaskets and closed end caps reach IP65 against driven rain and snowmelt, and drain provisions keep water from standing against the strip. Anodized or powder-coated surfaces resist corrosion between seasons, and a UV-stabilized diffuser does not yellow, which is what makes the same run usable next December without rework.

Sections cover eave and soffit runs, slim trims for windows and columns, tree and frame tracks, and corner joints. 24 V is specified for long elevations and RGBW for scene switching, with single colour available. Cut to increments, mitred, drilled and kitted in installation sequence.

  • Technical Specifications
  • Applications
  • Advantages
  • FAQ
  • Recommended Products

Technical Specifications

Item Specification
Product name Christmas Decorative Lighting Aluminum Track
Alloy and temper 6063-T5
Extrusion Hot extruded; straightness and twist per GB/T 5237 tolerance class
Section families Eave and soffit run, window and column trim, tree and frame track, corner joints
Mounting Clips or screws into fascia, soffit and trim; recessed sections require a rebate
Profile length 1 m / 2 m / 2.5 m / 3 m, or cut to project increments
Wall thickness 1.2 mm – 2.0 mm
Strip width accepted 8 mm – 12 mm
Diffuser Opal polycarbonate, UV-stabilized; snap-in or compression fit
Ingress protection IP65 as sealed assembly; IP67 with potted strip
Operating voltage 24 VDC standard, 12 VDC available
Colour output RGBW standard for scene switching; single colour available
Surface finish Anodized (black / silver / champagne) or powder coated to RAL, coating ≥ 60 μm
Accessories End caps, gaskets, spring clips, corner connectors, connecting pins
Operating temperature −25 °C to +50 °C
Place of Origin Shanghai, China
Brand Name Qinkai / OEM
Model Number QK-XMAS series (assigned per section)
Certification Mill test certificate per lot; salt-spray and coating adhesion reports on request
MOQ To be confirmed per section

      

application-scenes-720.jpgpackaging-720.png

Applications

· Eaves and rooflines. One fixed run that carries the holiday colour scene and warm white for the rest of the year.

· Windows, columns and porch trim. Slim sections that follow the reveal and stay inconspicuous in daylight.

· Trees and yard frames. Straight track and corner joints for formed displays in the front yard.

· Storefront and commercial displays. Repeatable mounting points for seasonal changeovers on retail frontage.

Application image width on page: 720 px when a single image is used.

Advantages

· Installed once, used every season. No annual ladder work, no re-clipping and no fascia patching each December.

· Holiday as a scene. RGBW output on a 24 V controller changes colour without touching the hardware.

· Colour without diode points. UV-stabilized opal polycarbonate diffuses across the full profile width.

· Corners that close. Mitred sections and corner connectors hold the line at gables and porch returns.

· Sealed for winter. Gaskets, closed end caps and drain provisions reach IP65 against driven rain and snowmelt.

· Finish that holds between seasons. Anodized or ≥ 60 μm powder coating resists corrosion on the wall and off it.

· Project processing. Cut to increments, mitred, drilled and kitted in installation sequence.

· One profile language. Same extrusion family as the permanent outdoor line, in one finish.

FAQ

Can the track be used year-round, not only at Christmas?

Yes. The hardware stays in place; the holiday look is an RGBW scene on the controller. The same run provides warm white for everyday lighting the rest of the year.

How does the colour change work?

An RGBW strip on a 24 V controller with scene presets or app control. The track, diffuser and mounting do not change — only the output.

Will the clips rust?

Clips are stainless steel, with the grade specified to climate and coastal exposure. Confirm the grade at quotation for salt-air sites.

Does the finish survive year after year outdoors?

Anodized and ≥ 60 μm powder-coated surfaces are specified for exterior use. Salt-spray and coating adhesion reports are available per order.

12 V or 24 V?

24 V for eaves and long elevations, since it tolerates roughly twice the run length of 12 V before voltage drop becomes visible.

Can corners be mitred?

Yes — supplied mitred to the angle, or formed on site and closed with corner connectors.

Do you support custom lengths, colours and drilling?

Yes — OEM and ODM. Send the drawing or a sample section, the mounting pattern and the finish reference; the drawing is confirmed before production.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000
christmas decorative lighting aluminum track for eaves and windows-1

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000