Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000
commercial lighting installation aluminum track for facades and canopies-0

Commercial Lighting Installation

Home >  Products >  Permanent Outdoor Lighting >  Commercial Lighting Installation

Commercial Lighting Installation Aluminum Track for Facades and Canopies

A commercial elevation is judged at a distance, and at a distance a lighting line either reads as one continuous stroke or as a series of parts. The product here is an extruded 6063-T5 aluminum track carrying an LED strip behind a diffuser, specified for canopy edges, parapets, signage surrounds and retail frontage. We extrude, finish and cut the sections in-house, and supply the gaskets, end caps and connectors as one assembly.

Long runs are where commercial projects differ from residential ones. A low-voltage line that looks correct at the first metre dims toward its far end, so 24 V is the default and feed points are planned into the layout rather than added later. Sections are also specified straight enough for a sightline: a track that wanders by a few millimetres reads as a curve across a 40-metre canopy, and no diffuser hides that.

The facade is a maintenance surface, not a sealed box. Commercial installations are serviced, so the diffuser is removable and the strip is replaceable without taking the track off the structure. Gaskets and closed end caps reach IP65 against driven rain, and thermal movement is accounted for: aluminium expands about 2 mm per 3 m of run over a 30 °C swing, so runs are broken at joints that allow the extrusion to move instead of buckling at a mitre.

Finish and consistency decide how the elevation is read across phases. Anodized or powder-coated surfaces at 60 μm or more hold colour, and anodizing batches are matched within the project so a second delivery does not arrive a shade off the first. Sections cover canopy and parapet runs, signage surrounds, column wraps and wide or deep sections for higher output.

  • Technical Specifications
  • Applications
  • Advantages
  • FAQ
  • Recommended Products

Technical Specifications

Item Specification
Product name Commercial Lighting Installation Aluminum Track
Alloy and temper 6063-T5 (6061-T6 available for structural sections)
Extrusion Hot extruded; straightness and twist per GB/T 5237 tolerance class
Section families Canopy edge, parapet outline, signage surround, column wrap, wide and deep sections
Mounting Clips or screws into substrate; concealed fixing sections available
Profile length 1 m / 2 m / 2.5 m / 3 m, or cut to project increments; longer sections quoted per project
Wall thickness 1.2 mm – 2.0 mm
Strip width accepted 8 mm – 12 mm
Diffuser Opal polycarbonate, UV-stabilized; removable for service access
Ingress protection IP65 as sealed assembly; IP67 with potted strip
Operating voltage 24 VDC standard, 12 VDC available
Light source RGBW or single colour strip, buyer-specified
Surface finish Anodized or powder coated to RAL, coating ≥ 60 μm; batch colour matched
Thermal provision 2 mm movement per 3 m run over a 30 °C swing, absorbed at expansion joints
Accessories End caps, gaskets, expansion joints, corner connectors, connecting pins
Operating temperature −25 °C to +50 °C
Place of Origin Shanghai, China
Brand Name Qinkai / OEM
Model Number QK-COM series (assigned per section)
Certification Mill test certificate per lot; salt-spray and coating adhesion reports on request
MOQ To be confirmed per section

              

Overview1.pngOverview2.pngOverview3.png

packaging-720.png

Applications

· Canopy and parapet edges. Continuous outline on low-rise offices, showrooms and forecourt canopies.

· Signage surrounds and fascia bands. A lit border that reads as part of the architecture rather than an add-on.

· Column wraps and entry portals. Vertical runs that carry the line around a corner without a visible break.

· Facade retrofit. Surface-mounted sections added to an existing elevation without re-cladding.

Application image width on page: 720 px when a single image is used.

Advantages

· Straight enough for long sightlines. Straightness and twist held to GB/T 5237 class, which is what a 40-metre canopy demands.

· Feed points planned, not improvised. 24 V default with layout support for long runs and multiple feeds.

· Serviceable in place. Removable diffuser and replaceable strip without removing the track from the structure.

· Expansion accounted for. Joints sized to absorb roughly 2 mm per 3 m over a 30 °C swing.

· Sealed for weather. Gaskets and closed end caps reach IP65 against driven rain.

· Colour matched across phases. Anodizing batches matched within a project so later deliveries do not shift shade.

· Finish that holds. Anodized or ≥ 60 μm powder coating tested per order.

· Project processing. Cut to increments, mitred, drilled and kitted in installation sequence.

FAQ

Can one feed cover a long canopy run?

Usually not. Voltage drop accumulates along a 24 V line, so long elevations are split into feeds and the layout is planned before production. Send the run lengths and we return a feed plan with the drawing.

How is thermal movement handled?

Aluminium moves with temperature. Runs are broken at expansion joints sized for roughly 2 mm per 3 m over a 30 °C swing, so the extrusion slides instead of buckling at a mitre.

Can the strip be replaced without removing the track?

Yes. The diffuser is removable and the strip is serviceable in place, which is the reason commercial sections are specified with accessible covers rather than bonded assemblies.

Will a second delivery match the first?

Anodizing and powder coating batches are matched within the project. For phased facades, state the project reference at order so later deliveries are coated to the same reference.

What IP rating is achievable?

IP65 as a sealed assembly, IP67 with a potted strip. The rating depends on end caps and gaskets being assembled correctly, not on the profile alone.

Do you supply the driver and controls?

The track, diffuser and accessories are ours. Drivers and controllers can be specified with us as a matched assembly or supplied by the buyer's electrical contractor.

Do you support custom sections, lengths and drilling?

Yes — OEM and ODM. Send the elevation drawing or a sample section, the mounting pattern and the finish reference; the drawing is confirmed before production.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000
commercial lighting installation aluminum track for facades and canopies-1

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000